Whole Parts Refrigerator Door Gasket Seal (White) Part# DA97-12522G - Replacement & Compatible with Some Samsung Refrigerators
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

Whole Parts Refrigerator Door Gasket Seal (White) Part# DA97-12522G - Replacement & Compatible with Some Samsung Refrigerators

Add Your Review
Available:In Stock
$84.50 $198.89

Whole Parts Refrigerator Flex zone Drawer Door Gasket Seal (White) Part# DA97-12522G. Approximate Size is 31.50” x 8.11”. This Part Replaces OEM22483042, AP5620760, 3973453, DA97-05557U, PS4176605.

About the Installation:

1. Place the gasket in a basin or bathtub and soak it in warm water (120-160 °F) for 10 minutes to restore shape to any bent or wrinkled areas. Note: Do not use boiling water, and do not soak it for too long. After soaking, remove the gasket from the water and gently wipe dry. Lay the gasket flat along the side of the refrigerator. If there are any part arches or bends, stretch it flat and keep it in this state for at least 6 hours.

2. Install the gasket the next day: First press the four corners of the seal into the groove, then press the four sides in sequence. Smooth it by hand to make the surface even.

3. After closing the door, check for gaps. If there are gaps, reopen the door and use a hair dryer on low to medium heat on the area while smoothing the gasket with your hand until the gap disappears. If the door does not close properly or is difficult to close, check whether the gasket is jammed on the hinge side. If jammed, reopen the door and insert a sheet of paper from inside the refrigerator toward the outside at the jammed position. Close the door firmly and keep it closed, then slowly pull the paper out from the outside. Repeat several times until the jam is eliminated.

4. After completing all steps, close the door firmly and press it tight. Tape the refrigerator door shut to let it cool and set in shape. Keep it closed for at least 12 hours.

Compatible models are but not limited to: RF25HMEDBWW/AA-00, RF25HMEDBWW/AA-01, RF25HMEDBWW/AA-02, RF25HMEDBWW/AA-03, RF4267HARS/XAA-01, RF4267HARS/XAA-02, RF4267HARS/XAA-03, RF4267HARS/XAA-04, RF4267HARS/XAA-05, RF25HMEDBSR/AA-00, RF25HMEDBSR/AA-01, RF25HMEDBSR/AA-02, RF25HMEDBSR/AA-03, RF25HMEDBSG/AA-00, RF25HMEDBSR/AA-10, RF25HMEDBSR/AA-11, RF25HMEDBSR/AA-12, RF25HMEDBSR/AA-13, RF25HMEDBSR/AA-14, RF25HMEDBSR/AA-15, RF4267HARS/XAA-00, RF25HMEDBWW/AA-10, RF25HMEDBWW/AA-11, RF25HMEDBWW/AA-12, RF25HMEDBWW/AA-13, RF25HMEDBWW/AA-14, RF25HMEDBWW/AA-15, RF4267HAWP/XAA-01, RF4267HAWP/XAA-02, RF4267HAWP/XAA-03, RF4267HAWP/XAA-04, RF4267HAWP/XAA-05, RF4267HAWP/XAA-06, RF25HMIDBSR/AA-00.

The Refrigerator Flex Zone Door Gasket Assembly DA97-12522G is designed to ensure your Samsung refrigerator operates efficiently and effectively. It creates a secure seal around the door, preventing cold air from escaping and maintaining the optimal temperature inside your fridge. By replacing a worn or damaged gasket, you can improve your refrigerators energy efficiency and keep your food fresher for longer periods.

Whole Parts Refrigerator Flex zone Drawer Door Gasket Seal (White) Part# DA97-12522G. Approximate Size is 31.50” x 8.11”. This Part Replaces OEM22483042, AP5620760, 3973453, DA97-05557U, PS4176605.

About the Installation:

1. Place the gasket in a basin or bathtub and soak it in warm water (120-160 °F) for 10 minutes to restore shape to any bent or wrinkled areas. Note: Do not use boiling water, and do not soak it for too long. After soaking, remove the gasket from the water and gently wipe dry. Lay the gasket flat along the side of the refrigerator. If there are any part arches or bends, stretch it flat and keep it in this state for at least 6 hours.

2. Install the gasket the next day: First press the four corners of the seal into the groove, then press the four sides in sequence. Smooth it by hand to make the surface even.

3. After closing the door, check for gaps. If there are gaps, reopen the door and use a hair dryer on low to medium heat on the area while smoothing the gasket with your hand until the gap disappears. If the door does not close properly or is difficult to close, check whether the gasket is jammed on the hinge side. If jammed, reopen the door and insert a sheet of paper from inside the refrigerator toward the outside at the jammed position. Close the door firmly and keep it closed, then slowly pull the paper out from the outside. Repeat several times until the jam is eliminated.

4. After completing all steps, close the door firmly and press it tight. Tape the refrigerator door shut to let it cool and set in shape. Keep it closed for at least 12 hours.

Compatible models are but not limited to: RF25HMEDBWW/AA-00, RF25HMEDBWW/AA-01, RF25HMEDBWW/AA-02, RF25HMEDBWW/AA-03, RF4267HARS/XAA-01, RF4267HARS/XAA-02, RF4267HARS/XAA-03, RF4267HARS/XAA-04, RF4267HARS/XAA-05, RF25HMEDBSR/AA-00, RF25HMEDBSR/AA-01, RF25HMEDBSR/AA-02, RF25HMEDBSR/AA-03, RF25HMEDBSG/AA-00, RF25HMEDBSR/AA-10, RF25HMEDBSR/AA-11, RF25HMEDBSR/AA-12, RF25HMEDBSR/AA-13, RF25HMEDBSR/AA-14, RF25HMEDBSR/AA-15, RF4267HARS/XAA-00, RF25HMEDBWW/AA-10, RF25HMEDBWW/AA-11, RF25HMEDBWW/AA-12, RF25HMEDBWW/AA-13, RF25HMEDBWW/AA-14, RF25HMEDBWW/AA-15, RF4267HAWP/XAA-01, RF4267HAWP/XAA-02, RF4267HAWP/XAA-03, RF4267HAWP/XAA-04, RF4267HAWP/XAA-05, RF4267HAWP/XAA-06, RF25HMIDBSR/AA-00.

The Refrigerator Flex Zone Door Gasket Assembly DA97-12522G is designed to ensure your Samsung refrigerator operates efficiently and effectively. It creates a secure seal around the door, preventing cold air from escaping and maintaining the optimal temperature inside your fridge. By replacing a worn or damaged gasket, you can improve your refrigerators energy efficiency and keep your food fresher for longer periods.

WHOLEPARTS.COM Return/Exchange Policy

Exchange:

We may exchange any unused/uninstalled/unopened item in its original condition, in its original packaging up to 30 days of the date that you purchased the item from us. The customer agrees to pay for the shipping cost.

 

Return & Refund:

You may return any unused/uninstalled/unopened item in its original condition, in its original packaging, up to 30 days of the date that you purchased the item from us for a full refund minus the original shipping cost. And the 30% restocking fee may apply.

WE WILL NOT ACCEPT A RETURN ON ANY PART ONCE IT HAS BEEN INSTALLED. Buyer is responsible to pay return shipping costs. Please contact us BEFORE attempting a return.

To request an RMA, (Return Merchandise Authorization)  Please send an email to: help@wholeparts.com .

Please provide the following information (no screen shots): 

  1. Original order number 

  1. Full name and address (as it appeared on the original order) 

  2. Issue (item defective, wrong part received, etc.)

We will promptly respond with return instructions and the return shipping address.

 

Abuse of the return/exchange policy: WHOLEPARTS.COM  reserves the right to refuse to sell to any person or company for any reason if we suspect that a person or company is abusing our return/exchange policy.

 


The following items are not eligible for return/exchange under our 30-day return policy:

· Items not in their original condition.

· Items not in their original condition include, parts that had been installed.

· Parts that have been installed are considered used and can not be returned.

· Parts that are damaged during attempted installation.

 

WHOLEPARTS.COM reserves the right of the return/exchange policy explanation and execution. For more information about the return and exchange policy, please send an email to help@wholeparts.com .